Techniques for Applying Glaze 'n Go
There are certain application techniques to follow to achieve the absolute best results with Glaze 'n Go.
Glaze ‘n Go is a tack-free UV cured sealant that is compatible with acrylic, gel or any other enhancement product. Its brush-on application makes it one of the easiest and quickest ways to finish a nail enhancement service; however there are still certain application techniques to follow to achieve the absolute best results.
Once the enhancements are filed and shaped, you will need to remove the dust. Lightly saturate a Nail Wipe with Cleanse and wipe the nail, making sure to get into the sidewalls. Make sure that the nail is dry before applying Glaze ‘n Go. It should only take a few seconds.
In order to achieve that high-gloss shine, simply immerse the brush completely in the gel and gently brush against the lip of the container on one side. This will leave you with a generous amount of product to coat the nail.
Apply Glaze ‘n Go with a light touch so that the bristles of the brush are barely bending. If you apply too much pressure when applying, the brush will actually remove the gel from the surface. Go back into the container with your brush for each nail.
Glaze n Go is a hybrid cross between a gel and a top coat, and has a thin viscosity. (see photo below). Not applying enough Glaze ‘n Go to the nail surface may lead to dull spots or a crackling effect.
